Home / 제품 / 소방 호스

소방 호스

Taizhou Sanjiang Fire Control Equipment Co.,Ltd was established in 2002 , is a professional manufacturer engaged in research, development, production, sale and service of fire hose. Dedicated to strict quality control and thoughtful customer service, our experienced staff are always available to discuss your requirements and ensure full customer satisfaction. Our main products include PVC Fire Hose, Fire Fighting Hose, Red Fire Hose, White Fire Hose, Duraline Fire Hose, Angus Fire Hose, Marine Fire Hose, Fire Resist Hose, Fire Hose with Coupling, Jacket Fire Hose, Fire Hose Pipe, etc.

홈 12 3 끝쪽 1/3

We have a strong sales and service team of 20 people, with more than five years experience in foreign trade, to provide professional services for customer.

We have advanced production facilities, including 13 high-speed fiber braid machines, 15 high-speed steelwire braid machines, 2 steel wire spiral production lines, 45 PVC hose production lines. We have introduced VP brand Industrial hose production line from Italy and Maillefer extrusion line from Switzerland.

We have strong quality control team, we set up advanced laboratory. Before mass production, we test each batch raw material. After production, we test each hose to guarantee 100% qualification.

A fire hose is a high-pressure hose that carries water or other fire retardant to a fire to extinguish it. Outdoors, it attaches either to a fire engine, fire hydrant, or a portable fire pump. Indoors, it can permanently attach to a building's standpipe or plumbing system.

Fire Hoses are constructed with durable materials capable of withstanding high-pressure situations and extreme temperatures, ensuring longevity and reliability during emergencies

Attack hose is a fabric-covered, flexible hose used to bring water from the fire pumper to the nozzle. This hose ranges in nominal inside diameter from 1.5 to 3 in (38 to 76 mm) and is designed to operate at pressures up to about 400 psi (2,760 kPa). The standard length is 50 ft (15.24 m).

Supply and relay hoses are large-diameter, fabric-covered, flexible hoses used to bring water from a distant hydrant to the fire pumper, or to relay water from one pumper to another over a long distance. These hoses range in nominal inside diameter from 3.5 to 5.0 in (89 to 127 mm). They are designed to operate at pressures up to about 300 psi (2,070 kPa) for the smaller diameters and up to 200 psi (1,380 kPa) for the larger diameters. The standard length is 100 ft (30.48 m).

Forestry hose is a fabric-covered, flexible hose used to fight fires in grass, brush, and trees where a lightweight hose is needed to maneuver it over steep or rough terrain. Forestry hose comes in 1.0 and 1.5 in (25 and 38 mm) nominal inside diameters and is designed to operate at pressures up to about 450 psi (3,100 kPa). The standard length is 100 ft (30.48 m).

Booster hose is a rubber-covered, thick-walled, flexible hose used to fight small fires. It retains its round cross-section when it is not under pressure and is usually carried on a reel on the fire pumper, rather than being stored flat. Booster hose comes in 0.75 and 1.0 in (19 and 25 mm) nominal inside diameters and is designed to operate at pressures up to 800 psi (5,520 kPa). The standard length is 100 ft (30.48 m).

Suction hose, sometimes called hard-suction hose, is usually a rubber-covered, semi-rigid hose with internal, metal reinforcements. It is used to suck water out of unpressurized sources such as ponds, rivers, or swimming pools for home wildfire protection purposes. Hard-suction hose comprises multiple layers of rubber and woven fabric encapsulating an internal helix of steel wire. Some very flexible hard-suction hoses use a thin, polyvinyl chloride cover with a polyvinyl chloride plastic helix. Suction hose ranges in nominal inside diameter from 2.5 to 6.0 in (64 to 152 mm). The standard length is 10 ft (3.05 m).

In industries dealing with high-temperature processes, fire hoses are employed to cool equipment and ensure the safety of personnel. Fire hoses can be used to disperse water or specialized solutions to contain and control chemical spills.

We have four modern production areas, covers more than 30 acres, with 50 sales subsidiaries and 560 outstanding employees.

Sanjiang fire hoses are approved by UL, FM, MSHA, EN14540, DIN14811, BS6391, MED, LR, NFPA1961, EN671, EN694, NSF, CCC, CCS, CE. Sanjiang fire has passed the ISO 9001 certification.

A: Fire hose nozzles with a fog spray pattern expel a cone-shaped stream of small water droplets. The droplets are easily converted into steam, which helps take hot air out of a room. Water from straight stream nozzles is discharged in the shape of a column.

A: As early as 400 B.C. hose played a part in fighting fire. In this era, the hose was made out of ox gut. Firemen filled bags with water and then forced them into the ox gut. The water was forced out of these early hoses by either sitting or stomping on the bag and the hose.

A: It seems counterintuitive: fire hoses – the key firefighting tool used by firefighters across the country -- are not fire-resistant. Yet the hoses, usually made from woven cotton and rubber, can burn through when they are not charged with water, putting firefighters in grave danger.

Q: What is Type 3 fire hose?

A: The Brigadier Type 3 layflat fire hose is characterised by its heavy duty, high abrasion resistance and extremely long service life. Flexible and kink resistant structure produced with very low twist, it is a multipurpose hose suitable for a wide range of applications.

A: nd the water pressure of the hose will range from 20 to 400 pounds per square inch, depending on the situation and availability of water. In the most common situations, firefighters use a lightweight, single-jacket hose with a reach of about 50–100 feet.

A: The three basic types of fire hose are: Single Jacket. Double Jacket. Rubber-covered Lay-flat.

A: Our H Class Fire Hose is a popular choice with both fire brigades and industrial plants. It is a high pressure fire hose, manufactured with a specially-formulated nitrile extruded synthetic rubber cover. This extruded cover protects the hose against abrasion, chemical damage and rough use.

A: There were few other options for firefighting until Jan van der Heiden and his son Nicholaas invented the first fire hose in 1673. Their hose was 50 feet long, created from leather tubes sewn together, and attached to gooseneck nozzles on engines that pushed through water.

A: Each 100-foot section of dry hose weighs about 102-pounds, and when filled with water, each foot weighs nearly10-pounds.

A: The standard three sizes of hose lines are 1½, 1¾ and 2½ inch. Depending on the size and severity of the fire, hose line requirements vary to get the job done efficiently. Selecting the incorrect one from the start can cause delays in fire suppression and exhaustion.

Q: What is the difference between Type 1 and Type 2 fire hose?

A: Type 1 hoses have no external treatments applied. Type 2 hoses have external coating has been applied to the reinforcement to give some protection against the absorption of liquids and to improve resistance to abrasion.

A: Given the need for fire hose in different environments and situations, the length of a fire hose will differ based on its intended use. The most common hose length is 50 feet, but some of our BullDog fire hoses can be up to 100 feet coupled or 660 feet uncoupled.

A: Avoid having any obstructions around or near the hose reel assembly and the valve handwheel. Maintain at least 2 m clearance around the spindle and 100 mm from the handwheel. The hose should be able to be pulled and run in any direction for the best coverage in fighting a fire.

Q: What is 5 fire hose used for?